|
Features
GIO-LITE FR-119, Yellow-silver-Yellow, Fire Coat Trim has a reflective silver stripe centered with the fluorescent color surface layer, which is bonded to an anti-flame T/C (65% Polyester + 35% Cotton) colth backing. FR-119 is designed to enhance the visibility of the wearer in low-light conditions.
Composition
| Glass bead |
20% |
| Resin |
30% |
| Backing Cloth |
40% |
| Others |
10% |
Retroreflective Performance
BS EN 471 table 5, class 2 High Visibility Warning Clothing for professional use Test methods and requirements.
| Observation angle |
Entrance angle |
Test Result
(cd/lux.m2) |
minimum coefficient of retroreflection in cd/lx.m2 |
| 12' |
5' |
500 |
330 |
Physical performance after test exposure
BS EN 471 : 2003 clause 6.2.1 High Visibility Warning Clothing for professional use Test methods and requirements
| After abrasion |
BSEN 530:1991 Method 2 - 5000 rubs |
| After flexing |
ISO 7854:1984 Method A - 7,500 cycles |
| After folding at cold temparatures |
ISO 4675 : 1990 (-20°C) |
| During rainfall |
EN471: Annex A |
| After temperature variation |
12 hours @50+/-2°C, 20 hours@ -30+/-2°C. cond. > 2 hrs. |
| After washing |
ISO 6330:1984 Method 2A@90°C;dried stress-free at 50+/-5°C.- 25 cycles |
- BS EN 532 : 1995 : Clothing for protection against heat and flame- Method of test for
Limited Flame Spread
- BS EN 533 : 1997 : Protective clothing-Protection against heat and flame-Limited flame
spread materials and clothing
(Conditioning atmosphere : 20℃, 64% RH)
| Specimen reference : 14656 |
Flame application time 10 sec. |
| Face tested FACE |
Fabric - Length direction |
Fabric - Width direction |
| Specimen number |
1^ |
2^ |
3^ |
4^ |
5< |
6> |
| Duration of flaming (sec) |
0 |
0 |
0 |
0 |
0 |
0 |
| Flaming debris |
N |
N |
N |
N |
N |
N |
| Flame reached an edge |
N |
N |
N |
N |
N |
N |
| Formation of hole |
N |
N |
N |
N |
N |
N |
| Afterglow spreads beyond flame area |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
| Tear length (if required) mm |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Requirements
Limited flame spread index 1 : No specimen shall permit any part of the lowest boundary of any flame or hole to reach the upper or either vertical edge. No specimen shall give flaming debris. Any afterglow shall not spread from the carbonised area to the undamaged area after 2 seconds.
satisfied and in addition, the mean afterflame time of any set of six specimen shall not exceed Limited flame spread index 3 : The requirements of Limited flame spread index 2 shall be satisfied and in addition, no specimen shall give hole formation.
Limited flame spread index 2 : The requirements of Limited flame spread index 1 shall be the cessation of flaming.
Application instructions
- Sewing
More than 2mm from the edge of the reflective fabric is required
No more than 12 stitches per inch (2.54 cm)
- Sewing Thread : 100% Polyester is recommended.
Care instruction for the finished product
Home wash
Washing
- Washer : Standard household washing machine
- Temperature : 60°C
- Detergent : standard household detergent
- Setting : colored clothing without pre-wash
Maximum washing time on highest temperature not to exceed 12 minutes.
Maximum total washing time not to exceed 50 minutes.
Test fabric for dye migration.
Bleaching : not recommended
Drying : low tumble dry
Dry cleaning : normal cycle
Ironing
Do not use steam, use a cool or warm temperature setting, avoid direct contact of the tape when ironing, use a press cloth.
Specification
| Standard Width |
Roll Length |
Q'ty/carton |
Weight/carton |
Volume/carton |
| 51mm (±1mm) / 19mm |
50mts |
600mts |
20 kgs |
0.032 CBM |
| 76mm (±1mm) / 25mm |
50mts |
400mts |
20 kgs |
0.032 CBM |
Storage
- Keep away from the direct sunlight, hot and humid place.
- Use within 1 year from the date of the lot number(production date).
|
Click to enlarge image 
Company